Need help?Do you have a question about the CHINT NVF5-1.5/TS4-B and is the answer not in the manual?
General| Model | NVF5-1.5/TS4-B |
|---|---|
| Rated Power | 1.5 kW |
| Output Power | 1.5 kW |
| Frequency | 50/60 Hz |
| Protection Level | IP20 |
| Humidity | 5% to 95% (non-condensing) |
| Cooling Method | Forced Air Cooling |
Advises against installing damaged inverters and touching terminals directly.
Highlights dangers of electric shock and fire during installation.
Details safe wiring practices to prevent electric shock and equipment damage.
Provides safety guidelines for operating the inverter.
Provides detailed technical data including input, output, and control functions.
Provides a step-by-step guide for basic inverter commissioning.
Details how to set the main frequency reference from various sources.
Configures inverter start modes and stop modes.
Explains the process of automatically tuning motor parameters.
Details parameters for vector control modes, including speed and torque.
Provides a flowchart for diagnosing inverter faults.
Lists common fault codes, reasons, and corrective actions.
Provides essential safety and procedural instructions for maintenance.
Lists parameters for basic program settings like motor control and frequency reference.
Details parameters related to inverter start and stop operations.
Parameters for configuring motor characteristics and auto-tuning.
Parameters for advanced vector control modes, speed, and torque.
Parameters for configuring V/F curves and voltage control.
Configuration settings for digital input terminals and HDI.
Configuration settings for digital and relay output terminals.
Parameters related to keypad operation, lock, and menu modes.
Advanced parameters for jogging, skip frequency, and protection.
Parameters for PID control loop configuration and tuning.
Parameters for simple PLC operation and multi-preset speed settings.
Parameters for various protection and early alarm functions.
To Next Page
