Need help?Do you have a question about the CHINT NVF5-3.7/TS4-B and is the answer not in the manual?
Detailed instructions for wiring power and I/O terminals.
Details different parameter menu modes and how to select/set them.
Outlines the basic steps for setting up and commissioning the inverter.
Configures start commands and various frequency reference sources.
Manages inverter start/stop modes, acceleration, and deceleration.
Guides on motor auto-tuning, V/F curves, and vector control parameters.
Details vector control, protection mechanisms, and fault handling.
Guides on diagnosing issues and resolving abnormal operations.
Detailed instructions for wiring power and I/O terminals.
Details different parameter menu modes and how to select/set them.
Outlines the basic steps for setting up and commissioning the inverter.
Configures start commands and various frequency reference sources.
Manages inverter start/stop modes, acceleration, and deceleration.
Guides on motor auto-tuning, V/F curves, and vector control parameters.
Details vector control, protection mechanisms, and fault handling.
Guides on diagnosing issues and resolving abnormal operations.
General| Rated Power | 3.7 kW |
|---|---|
| Model | NVF5-3.7/TS4-B |
| Protection Level | IP20 |
| Cooling Method | Forced Air Cooling |
| Humidity | 5-95% RH, non-condensing |
| Altitude | Up to 1000 m without derating |
| Storage Temperature | -20°C to +60°C |
To Next Page
