EasyManua.ls Logo

Chipolino ELITE - Carry Cot

Chipolino ELITE
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
14 – SWIVEL AND STRAIGHT MOTION OF FRONT WHEELS
IMPORTANT!Whenusingthestrolleronunevensurfaces,xthewheelsforstraightmotiononly.
15 – RESTRAINT SYSTEM (5-POINT SAFETY HARNESS)
15 – 1 To unfasten the safety belt, press the central buckle and split the belts.
CAUTION! ALWAYS USE THE RESTRAINT SYSTEM (SAFETY BELTS), TO AVOID FALLING OR
SLIPPING OF THE CHILD! Use the safety belts for newborn babies and for babies, who can sit alone
and unaided and can push her/himself on hands or knees as well!
CAUTION! Belt must be snug to child’s body and must not be twisted! Set the length of belts through
lenghtadjusters.
CAUTION! Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened.
CAUTION! The belts should not be worn or torn, and plastic buckles and fasteners must be sturdy, free
of damage and secure.
Safety belts can be set in 3 positions according to child’s height:
15-2Unfastenthebeltsundertheseat;
15-3–Removetheseatfabriccover;
15-4–Rotatethebuckleunderthefabriccoverandthreaditthroughtheslot;
15-5–Removetheotherbelttoo;
15-6 – Thread the belts through the slots of required position.
16 – CARRY COT.
CAUTION! Baby’s head should be above the level of his body!
16-1–Pullouttheleversuntiltheyxinchannels.
16-2 – Place the mattress in carry cot Pres the button at both sides of the canopy to fold or
unfold it.
16-3-Placethefootcoverandxittothecarrycotwithvelcrostraps.
17 – INSTALLATION AND REMOVAL OF CARRY COT AND CAR SEAT ON THE FRAME OF
STROLLER.
CAUTION! ALWAYS CARRY COT AND CAR SEAT MUST BE INSTALLED IN FACE TO FACE MODE!
Note: For your comfort before installation of carry cot or cat seat, always apply the parking device.
17-1–Installationofcarrycot;
17-2 Removal of carry cot.
Note: On the frame of this stroller, you can install car seat “ELITE” through the adaptors. Install the
adaptors to the car seat and then the car seat to the frame of stroller.
17 – 3 - Installation of adaptors to car seat
17- 4 - Install of car seat to stroller’s frame
17-5 – Fixed car seat on stroller’s fame
17-6 – Removal of car seat – press the button and take out the car seat from the frame.

Related product manuals