EasyManua.ls Logo

ChocoMaker 9805 - Assembling the Fountain; Assembly Steps

ChocoMaker 9805
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
WARNING
A risk of re and electrical shock exists in all electrical appliances and
may cause personal injury or death. Please follow all safety instructions.
FOR HOUSEHOLD USE
SAVE THESE INSTRUCTIONS
Appliance not intended for use by persons (including children with reduced physical, sensory or
mental capabilities), unless supervised by a responsible party. Children should be supervised to
ensure that they do not play with the appliance.
ASSEMBLING THE FOUNTAIN
01. Place fountain on a stable surface near an electrical outlet before assembling.
The fountain must be level in order to operate properly (see page 3 for Leveling Instructions).
02. Attach auger to the pin (shaped like a “D”) in the center of the fountain bowl, being sure it is securely attached.
03. Connect the pieces of the tower by rmly pressing together. Align the three notches on the bottom of
the tower to the three pins inside the fountain bowl. Be sure tower is securely attached.
AUGER CHANNEL
LOCATED INSIDE
TOWER
TOWER
BASE
FOUNTAIN
BUTTON
ADJUSTABLE
FEET
TOWER
AUGER
FOUNTAIN
BOWL
FOUNTAIN
BASE
THREE
TIERS
STAINLESS STEEL
BOWL
HEAT
BUTTON

Related product manuals