9
if you want to bi-amp
Bi-amping is a technique where you use one amplifier to drive the woofers (low
frequencies) and another to drive the tweeters (mid and high frequencies).
1. Connect your loudspeakers’ low frequency inputs to the binding posts labelled Right
and Left O/P 1.
2. Use RCA style connectors to connect Right O/P 2 to the Right IN on your power
amplifier, and connect Left O/P 2 to the Left IN on your power amplifier.
3. Connect the outputs of your power amplifier to your loudspeaker’s high frequency
inputs.
Remove any shorting links in the speaker binding posts.
4. On your remote control press PRE and then OP 1/2 to select both outputs 1 and 2.
See Figure 2 on page 19 for more details.
To Next Page
Loading...
