Chord Mojo2 - User Manual

2.0 Connect inputs
Connect digital devices via Micro-USB or
USB-C. Optical and coaxial can also be
used. Mojo 2 will auto-select the input
when music is playing. USB takes priority
over coaxial and then optical in that order.
1.0 Charging
For optimum performance fully charge
before use. Connect the Micro-USB
charging port to power; Battery status light,
blue = fully charged. Purple = desktop
mode when permanently connected.
PORTABLE DAC/HEADPHONE AMP
Mojo
2
Chord Electronics
Mojo 2 Quickstart Guide

Chord Mojo2 Specifications

General

Type	Portable DAC/Headphone Amplifier
Battery Life	Up to 8 hours
Weight	185g
Output Impedance	0.06Ω
Digital Inputs	USB, Optical, Coaxial
DAC Chip	Custom FPGA
Analog Outputs	2 x 3.5mm Jack
Headphone Impedance	8Ω to 800Ω
Charging	Micro USB
Frequency Response	20Hz – 20kHz
THD+N	0.0003%
Supported Sample Rates	44.1kHz to 768kHz
Bit Depth	16-bit to 32-bit
Dimensions	83mm (L) x 62mm (W) x 22.9mm (H)

Summary

Charging the Mojo 2

Connecting Inputs to Mojo 2

Connecting Headphones

Powering Up the Mojo 2

Adjusting Volume on Mojo 2