Need help?Do you have a question about the Chord ULTIMA PRE and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Inputs | XLR, RCA |
| Outputs | XLR, RCA |
| Power Supply | Dual-mono linear power supply |
| Output Impedance | 100Ω |
| Channel Separation | 100dB (1kHz) |
| Input Impedance | 100kΩ (RCA), 600Ω (XLR) |
Overview of the ULTIMA PRE's features and recommendation to read the manual.
Guidance on preventing liquid damage and managing heat to ensure longevity.
Warnings against dismantling and advice on minimizing RF interference for optimal performance.
Instructions on safely connecting external devices to the ULTIMA PRE.
Details the five-year warranty and how to register your purchase for potential future claims.
Outlines the process for making a warranty claim and lists common warranty exclusions.
An overview of the ULTIMA PRE's design, technology, and capabilities.
Details the display, volume/balance dials, menu buttons, IR window, and headphone jacks on the front.
Describes the top panel, noting its lack of user controls and the presence of illuminating light rings.
Explains the various inputs and outputs located on the rear panel for connecting equipment.
Details the operation of the remote control for the ULTIMA PRE, including dedicated sections.
Recommendations for positioning the ULTIMA PRE to ensure proper ventilation and remote control line-of-sight.
Guides on connecting various audio sources to the ULTIMA PRE using XLR or RCA inputs.
Instructions for connecting the ULTIMA PRE to a power amplifier using XLR or RCA outputs.
How to connect the ULTIMA PRE to recording devices using its dedicated RCA outputs.
Steps for integrating the ULTIMA PRE into an AV system using the AV Bypass feature.
How to connect headphones to the front panel jacks and manage loudspeaker muting.
Explains how to use front panel buttons or the remote to navigate the ULTIMA PRE's menu system.
Details how to adjust the volume and balance using the dedicated dials on the unit.
Explains how to select inputs (Bus A/B) and outputs (Out-1, AV BY, MUTE, H-PHN) via the display.
Guides on using the ULTIMA PRE's recording outputs (T1/T2) to capture audio from different sources.
Explains the AV Bypass mode for integrating with AV processors and the AV Bypass Monitor output.
How to use the EQ controls to adjust low and high frequency responses for each channel.
How to adjust input gain levels (x0.50 to x3.00) for different sources to balance volume.
To Next Page
