To Next PageTo Next Page
Need help?Do you have a question about the Chord Hugo2 and is the answer not in the manual?
General| Headphone Output Impedance | 0.025 Ohms |
|---|---|
| Dynamic Range | 126 dB |
| Output Power @ 32 Ohms | 740 mW |
| Output Power @ 300 Ohms | 94 mW |
| Dimensions | 130mm x 100mm x 21mm |
| Weight | 450g |
| Type | Portable DAC/Headphone Amplifier |
| Digital Inputs | Optical, Coaxial, USB |
| Analog Outputs | RCA, 3.5mm headphone jack, 6.35mm headphone jack |
| DAC Chip | Custom FPGA |
| THD + N | <0.0001% |
| Frequency Response | 20 Hz – 20 kHz |
| Battery Life | Approx. 7 hours |
| PCM Support | 44.1 kHz to 768 kHz |
| DSD Support | DSD64 to DSD512 |
| Signal to Noise Ratio | 126dB (A-weighted) |
Use a dry cloth for cleaning. Avoid liquids and sprays.
Protect with an official Chord Electronics leather case (sold separately).
Avoid spraying liquids directly onto the unit or allowing liquid contact.
Do not insert objects into connectors other than designated ones.
Avoid dropping or exposing the Hugo 2 to mechanical shock.
No user serviceable parts; contact dealer for faults. Disassembly voids warranty.
Operate only within the specified temperature range (5°C - 40°C).
Features a 3-year hardware warranty and 18-month internal battery warranty.
Compatible with Windows PC, Mac OS X, Linux, iOS, and Android devices.
Use Bluetooth Input (Blue) and pair with device using code '0000'.
Provides a three-stage DSP spatial effect for a more speaker-like presentation.
Activates by holding Input & X-PHD on startup. Sets maximum volume on all outputs.
Requires a 5V 2-amp USB power supply for effective charging.
If fully depleted, unit won't switch on. Connect charger for 30 mins.
Activate warranty by registering product at chordelectronics.co.uk/register-product.
Frequency response 20Hz-20kHz +/- 0.2dB. THD <0.0001% 1kHz 3V RMS.
Noise floor 2.6 uV A Wt. Signal to noise ratio 126dB A-weighted.
Channel separation 135dB @ 1kHz. Output impedance 25 milliohms.
Max output 94mW (300 ohms), 740mW (33 ohms), 1050mW (8 ohms).
Press and hold the button to power on. Unit charges at 1 or 2 amps.
Shows battery level from 0-5% to 75-100% charge.
After 24hrs, battery neither charges nor discharges; auto-shutdown disabled.
Unit automatically shuts down after 15 minutes of inactivity.
Allows playing and charging the Hugo 2 simultaneously.
Supports PCM from 44.1 kHz to 768 kHz, 16-bit to 32-bit.
Supports native DSD playback up to DSD512 (Octa-DSD).
Features automatic sample rate switching for PCM and DSD.
Includes 6.35mm headphone, 3.5mm headphone, and RCA analogue outputs.
Supports Micro USB, Coax, Optical, and Bluetooth inputs.
3.5mm digital coaxial supports dual data mode for 176.4kHz files.
Selectable inputs include HD USB, Coax 1, Coax 2, Optical, Bluetooth.
Intelligent filtering changes sonic presentation: Clean or Warmer options.
Crossfeed levels: MIN, MED, MAX for speaker-like soundstage.
Options for DAVE/Mojo with High-frequency roll-off for DSD playback.
Warning: Do not activate line level whilst operating headphones.
Press Power and Filter simultaneously to cycle between High and Low brightness.
