Chore-Time Chore-Tronics 2 - Control Operation; Manual Operation (Filling the Weigh Bin)

Control Operation Override Box
4
MT2309B
Manual Operation
Lower Switch and Push Button (Filling the weigh Bin)
To temporarily override the Chore-Tronics
®
control and fill the weigh bin manually, first place the Lower
Switch and Push Button toggle switch (Item 1, Figure 3) into the manual position. Set the slide bar (Item 2)
on the scale to the desired amount of feed and press the push button on the Weigh Scale Beam (Item 3) to
begin filling the weigh bin. When all the feed is in the bin, Return the switch to the automatic position. This
will return Control of the weigh system back to the Chore-Tronics
®
Control.
Figure 3. Manual Operation
Return Toggle Switch to the Auto position when feed is delivered
1
Step 1. Set Toggle Switch to the Manual Position
Step 2. Set Slide Bar to desired feed amount and
Step 3. Set the Toggle Switch back to Auto when feed is all in the Weigh Bin
2
Item Description
1 Lower Switch and Push
Button Toggle Switch
2 Slide Bar
3 Push Button on Weigh
Scale Beam
1
Set "Lower Switch and Push Button
Toggle Switch" to the Manual position.
press the Push Button
3