Chore-Time Chore-Tronics 2 - Upper Switch Operation (Delivering Feed); Feed Line Operation

Override Box Control Operation
MT2309B
5
Upper Switch (Delivering Feed to House)
To temporarily override the Chore-Tronics
®
Control to deliver feed into the house, first set the slide bar (Item
1, Figure 4) to the amount of feed desired to be delivered to the house. Then move the Upper Switch Toggle
switch (Item 2) to the manual position. When all of the feed has been delivered to the house return the switch
to the automatic position. This will return control of the Feeder fill system back to the Chore-Tronics
®
Control.
Feed Line (Operate Feed Lines)
To temporarily operate the feed lines from the Breeder Override Box, press and hold the Feeder line toggle
switch (Item 1, Figure 5) in the manual position. When the toggle switch is released the feed lines will turn
off..
1
Figure 4. Upper Switch Operation
Step 2. Set Toggle Switch to the Manual Position
2
Step 1. Set Slide Bar to desired feed amount
Step 3. Set the Toggle Switch back to Auto when feed is delivered
Item Description
1 Upper Switch Toggle Switch
2 Slide Bar
2
1
Item Description
1 Feedline Toggle Switch
Figure 5. Feeline Operation