Chore-Time Chore-Tronics 2 - Wiring to Chore-Tronics Control; External Wiring Terminals

Wiring Override Box 6
MT2309B
Wiring to Chore-Tronics Control and Weighmatic Scale
The three digital input terminals must be connected to the Chore-Tronics
®
2 Controls using twisted pair wire (part no. 42208). Failure to do so could result
in improper operation of the feeding system.
Wiring
DI1
12V
DI2
DI3
DI412V
DI5
12V
DI6
DI7
DI812V
CT 2 DIGITAL IN
FEED
CLOCK
RELAY
M. SCALE FILL RELAY (WEIGH FILL)
FILL CLOCK RELAY (FEEDER FILL
)
GROUND
Figure 6. Wiring to Chore-Tronics Control
EXTERNAL WIRING TERMINAL 1
1L1 Supply
2L2 Supply
3 Upper Switch Out
Scale Wiring
4 Upper Switch Return
5 Lower Switch Return
6 Push Button Return
7L1 Common
8 To Control (Feeder Fill Relay)
9 From Control (Feeder Fill Relay)
10 To Weigh Fill Relay
11 From Weigh Fill Relay
EXTERNAL WIRING TERMINAL 2
1 To Control Feeder Line Relay
2 From Control Feeder Line Relay
3
4
5
6
7 Upper Switch
8 Upper Switch C-Tronics
D1 Wiring
9 Lower Switch
10 Lower Switch
11 Push Button
12 Push Button