Need help?Do you have a question about the Christie CineLife+ CP4415-RGB and is the answer not in the manual?
Outlines requirements for a secure and reliable power supply connection.
Provides contact information for technical assistance and professional services.
General best practices and information for performing service tasks.
Mandatory safety measures to prevent injury and equipment damage.
Specific safety guidelines related to the projector's laser system.
Safety guidelines for connecting and working with AC power.
Information on hazardous optical radiation zones and safety distances.
Safety procedures for working on energized projector components.
Procedure to calibrate the projector's lens system for optimal performance.
Steps to align the projector's optical path for image accuracy.
Procedure for adjusting the Laser Optical Subsystem coupling mirrors.
Instructions for adjusting the integrator rod and fold mirror for illumination.
Procedure for mechanically adjusting DMD convergence using knobs.
Steps for adjusting convergence using the projector's menu.
Explains the purpose and prerequisites for LiteLOC calibration.
Step-by-step guide to creating a new calibration profile.
Steps to recalibrate an existing sensor-to-screen calibration file.
Process to check the integrity of the applied calibration.
General procedure for basic image alignment after assembly.
Calibrating black levels for the new color sensor board.
Safety precautions and procedure for filling the projector's coolant reservoir.
Procedure for removing and replacing the projector's light engine.
Procedures for removing and replacing the LOS for different models.
To Next Page
General