Need help?Do you have a question about the Christie Cinema 4K-RGB CP4330-RGB and is the answer not in the manual?
Minimum requirements for installation location, including environment and power.
Safety procedures for servicing energized equipment, including power shutoff.
Critical warnings and precautions for general operation and service.
Specific safety guidelines related to the projector's laser module.
Safety measures for connecting and working with AC power.
Information on hazard zones and distances due to light intensity.
Steps to calibrate the Intelligent Lens System (ILS) for optimal performance.
Procedure for balancing lens mount tilt to compensate for screen tilt.
How to adjust optics to control the illumination spot on the DMD.
Procedure for correcting color misalignment using a convergence test pattern.
Steps to adjust the LOS coupling mirror for optimal light path.
A comprehensive list of projector parts and their corresponding part numbers.
Detailed procedure for replacing the 12V and 48V power supply modules.
Instructions for removing the laser driver card cage module.
Steps to replace the integrator assembly that combines laser light.
Procedure for adjusting or replacing the fold mirror that directs light.
Detailed procedure for removing and replacing the projector's light engine.
Procedure for replacing the projector's LOS coupling elbow.
Procedure to replace the main input panel for communication and processing.
Steps to replace the Integrated Media Block (IMB) for feature-film content.
Procedure to replace the HKBB board, which interfaces with control devices.
Procedure to replace the LVCS board.
Steps to replace HVCS-R, HVCS-G, and HVCS-B boards.
Procedure to replace the color sensor board and upgrade housing.
Procedure to calibrate black levels for the new color sensor board.
Steps to calibrate LiteLOC v1 response to light intensity and temperature changes.
To Next Page
General