Need help?Do you have a question about the Christie CP2306-RGBe and is the answer not in the manual?
General| Color Gamut | DCI-P3 |
|---|---|
| 3D | Yes |
| Projection Technology | DLP |
| Light Source Life | 20, 000 hours |
| Resolution | 2048 x 1080 |
| Contrast Ratio | 2000:1 |
| Light Source | Laser |
| Input Connectors | HDMI, DisplayPort, 3G-SDI, DVI, VGA |
| Power Consumption | 3000W |
| Operating Temperature | 0 to 40 °C |
General safety advice to avoid personal injury or projector damage.
Safety guidelines for handling AC power to prevent electrical hazards.
Safety and warning guidelines for operating the projector's laser module.
Information on hazard zones and distances related to laser light intensity.
Information about labels found on the projector product.
Hazard warnings applicable to accessories and general safety.
Specific electrical hazards and other general safety warnings.
Required actions before performing maintenance or service procedures.
Indicates the presence of protective earth ground.
Information on Class 4 laser radiation and FDA laser variance warnings.
How to access installation, setup, and user information for the product.
Lists other documents providing additional product information.
A summary of the projector's capabilities, features, and design.
Instructions for recording installation details and contacting the dealer for assistance.
Highlights the important features and capabilities of the projector.
Explains how to use the touch panel for projector operation and functions.
Contact information for technical support for Christie cinema products.
Procedure to turn the projector on for content display or off for energy saving.
Steps to log on to the projector to access its menus and settings.
Procedure to log out to restrict access to projector menus or permissions.
How to turn the touch panel on or off to conserve energy.
Steps to calibrate the touch panel for improved responsiveness and appearance.
How to turn the light source on or off to extend laser life.
Procedure to open the douser to display light or close it to remove light.
How to create channels for customized projector settings for different inputs.
Steps to add an NTP server for time synchronization across projectors.
How to remove an NTP server when synchronization is no longer needed.
How to adjust time zone settings to match the local time zone.
How to set the projector time display to 12-hour or 24-hour format.
How to automatically adjust the projector time for daylight saving.
How to manually adjust the time offset when NTP is inactive.
Procedure to complete projector marriage for content display and DCI compliance.
How to change image orientation for multi-projector installations.
How to change the projector's host name for easier identification.
How to set temperature units to Celsius or Fahrenheit on the touch panel.
How to modify lamp power settings in the LiteLOC file.
How to delete a LiteLOC file when it is no longer needed.
How to set up notifications for lamp expiration and performance issues.
How laser power can be adjusted using the touch panel.
Detailed steps to adjust laser power via the JM laser touch panel.
Lists default access permissions for different user roles.
Steps to create new user accounts for accessing projector menus.
How to modify user account permissions to limit or increase access.
Procedure to change user account passwords for security.
How to delete a user account to prevent access to projector menus.
How to connect the projector to a theater network for remote control.
How to connect to NAS for ingesting and playing content.
How to connect to a media network for playing content.
How to activate SNMP for monitoring theater network conditions.
How to download MIB files for SNMP managed devices.
How to choose the type of integrated media block (IMB) being used.
Procedure to install and marry the IMB for secure content display.
Explanation of icons used in the content manager interface.
Steps to ingest content and keys from an ingest device.
How to cancel an ingest operation if it takes too long.
How to check the available storage capacity on the NAS.
How to filter content to locate specific types.
How to view available keys required for encrypted content.
How to filter the key list to find specific key types.
How to delete local content to free up storage space.
How to delete keys when they expire.
How to adjust column display in the content manager interface.
How to view detailed information about selected content.
Steps to load and play content on the projector.
How to unload content when it has finished playing.
Steps to create a new playlist of content files and automated events.
How to change the order of content playback within a playlist.
How to add a time offset to a macro that plays in a playlist.
How to replace existing content in a playlist with new content.
How to remove content from a playlist.
How to copy an existing playlist to create a new one.
How to open an intermission playlist from the top-level playlist.
How to view detailed information about content within a playlist.
How to import a playlist from another projector or computer.
How to export a playlist to another projector or computer.
How to delete a playlist when it's no longer required.
How to create a channel for input devices connected to the HDMI port.
How to create a channel for input devices connected to the IMB.
How to edit channel settings when input device parameters change.
How to copy channel settings to create a new channel.
How to change the active channel using the projector touch panel.
How to view the list of all available channels.
How to reorder channels in the list for easier access.
How to delete a channel when it's no longer required.
How to create Measured Color Gamut Data (MCGD) files for color correction.
How to edit MCGD files when on-screen color readings change.
How to copy MCGD file settings to create a new file.
How to delete an MCGD file when it is no longer required.
How to create Target Color Gamut Data (TCGD) files.
How to edit TCGD files when color readings change.
How to copy TCGD file settings to create a new file.
How to delete a TCGD file when it is no longer required.
How to activate the ILS for automatic lens position adjustment.
How to create an ILS file to set lens X, Y, zoom, and focus.
How to use Auto Calibrate for ILS to compensate for backlash and range.
How to edit ILS file settings when content requirements change.
How to duplicate ILS file settings to a new file.
How to delete an ILS file when it is no longer required.
How to use Reset Lens feature to set home position flags for ILS.
How to create source files for input device settings.
How to edit source file settings when input device changes.
How to duplicate source file settings to a new file.
How to delete a source file when it is no longer required.
How to create screen files to define display panel size and image cropping.
How to edit screen file settings when image parameters change.
How to copy screen file settings to a new screen file.
How to delete a screen file when it is no longer required.
How to perform digital convergence to improve on-screen image quality.
How to reset digital convergence settings to default.
How to adjust image to correct keystone effect.
Steps to correct horizontal keystone in dual projector setups.
Steps to correct vertical keystone in dual projector setups.
How to correct vignetting where the image is brighter at the center.
How to perform vertical boresight adjustment for image focus issues.
How to perform horizontal boresight adjustment for image focus issues.
How to correct misalignment of projected colors (RGB).
How to align the fold mirror to correct missing or shadowy corners.
How to create MCGD files to correct on-screen colors.
How to conceal unused screen edges with top or side masking.
How to display a test pattern for image refinement or diagnosis.
How to turn off a test pattern after adjustments are complete.
How to import custom test patterns for specific viewing environments.
How to delete a test pattern that is no longer required.
How to schedule automated playback of playlists, content, or events.
How to modify the run time and date of a scheduled event.
How to copy and paste a scheduled event to a different date/time.
How to copy and paste an entire day of scheduled events.
How to move a scheduled event to a different date and time.
How to delete an individual scheduled event.
How to delete all scheduled events for a specific day.
How to change the scheduler's start day of the week.
How to turn off the scheduler to stop automated events.
How to add a new storage device for content storage and playback.
How to edit storage device settings when they change.
How to designate a storage device as the primary content source.
How to delete a storage device when it is no longer required.
How to add a remote ingest source for uploading content.
How to edit settings for remote ingest sources.
How to delete a remote ingest source when it's no longer needed.
How to create a 3D file for 3D content playback.
How to edit 3D file settings to match hardware.
How to copy an existing 3D file to create a new one.
How to delete a 3D file when it is no longer required.
How to adjust the global audio delay setting.
How to adjust the audio output rate to match the audio device.
How to map DCP audio channels to AES outputs for speakers.
How to enable Dolby Atmos audio playback.
How to edit device settings for Dolby Atmos.
How to disable Dolby Atmos when no longer required.
How to enable multiple projectors for 3D or HDR content display.
How to add a slave projector for 3D or HDR content.
How to enable content synchronization for Christie NAS devices.
How to disable multi-projector settings when not needed.
How to disable a slave projector when it's replaced or no longer required.
How to delete a slave projector from a multi-projector configuration.
Defines macros as lists of actions for controlling playback and devices.
Input cues that wait for events to trigger playback delays.
Combines input cues with macros to trigger output actions.
Lists available actions for controlling automated events.
Lists projector-specific actions for automation macros.
Lists available built-in commands for the Christie ACT.
Lists available built-in commands for JNIOR devices.
Lists built-in commands for Dolby CP650, CP750, CP850 devices.
Lists built-in commands for SKA-3D devices.
Steps to create a macro for projector actions.
How to run a macro to perform a specific list of actions.
How to add an action to an existing macro.
How to combine macros for complex action sets.
How to delete macros when they are no longer required.
How to add an automation device for remote control.
How to modify settings for automation devices.
How to remove an automation device.
How to create triggers to activate automation devices in playlists.
How to edit playlist trigger settings.
How to delete a playlist trigger.
How to create global triggers to output macros.
How to edit global trigger settings.
How to delete a global trigger.
How to import a device library for controlling specific devices.
How to view a device library for available actions.
How to delete a device library.
How to import a license to activate product enhancements.
How to enable an enhancement after importing its license.
How to create a backup file to restore projector settings.
How to export backup files for disaster recovery.
How to import a backup file to restore projector settings.
How to locate backup files by name or creation date.
How to delete a backup file if it's no longer required.
How to add an upgrade package to update projector software.
How to select an upgrade file to install.
How to install an upgrade package to update projector software.
How to compare upgrade packages to view differences.
How to delete an upgrade package.
How to restore projector settings from a backup file.
How to restore factory default settings, removing custom configurations.
How to retrieve and download system logs for fault identification.
How to run the interrogator to identify and correct projector faults.
How to download a certificate to request KDM keys.
How to inspect projector vents and louvers for proper airflow.
How to inspect and clean optical components like the projection lens.
Lists recommended tools for cleaning projector optics.
Procedure for cleaning the projector lens to avoid scratching.
How to inspect the card cage air filter monthly.
How to inspect the filter in the light engine compartment.
How to clean a washable filter for the projector.
How to replace the projector lens, including precautions.
Covers issues related to projector power and basic operation.
Troubleshooting steps when the projector fails to power on.
Steps to resolve issues where input devices cannot communicate with the projector.
Covers common issues related to image display problems.
Troubleshooting steps for flickering, shadowed, or dim projector images.
Steps to resolve a blank screen issue when the projector is on.
Troubleshooting steps for image artifacts like smearing or double images.
How to fix vertical stretching or squeezing of the projected image.
Troubleshooting steps for unexpected or inaccurate display colors.
How to access diagnostics for the laser module.
Steps for assembling the touch panel for error diagnosis.
Lists various safety regulations and standards the product conforms to.
Details emissions and immunity requirements for EMC.
Information on environmental regulations and hazardous substance restrictions.
Requirements for international packaging recycling marks.
A list of error codes, their messages, and descriptions.
To Next Page
