Why is the measurement of V, I poor in my Chroma 61501?
Poor measurement of V, I in Chroma AC Power Distribution is caused by aging of components, which results in deviation of characteristics. Periodic calibration is required.
General| Brand | Chroma |
|---|---|
| Model | 61501 |
| Category | AC Power Distribution |
| Language | English |
Overview of the Programmable AC Source models and their capabilities.
Highlights of the AC source's configuration, input/output, and control features.
Detailed technical specifications for the AC source models.
Identification of front and rear panel components and connectors.
Detailed description of the front panel controls, display, and indicators.
Description of rear panel connectors and their functions for connectivity.
Procedures for inspecting the instrument upon arrival and handling potential damage.
Guidelines for instrument setup and detailed input power requirements.
Instructions for connecting loads and using the remote sense function.
Steps for powering on the unit, self-tests, and optional I/O connectors.
Overview of local operation via keypad/RPG and basic interface navigation.
Description of MAIN PAGE settings/measurements and CHOICE PAGE navigation.
Covers SETUP, CONF, OUTPUT lists for device configuration and modes.
Procedures for saving and recalling output settings and system data.
Overview of implemented software and hardware protection mechanisms.
Overview of the calibration process and required instruments.
Accessing manual calibration, password entry, and specific calibration procedures.
Procedure for calibrating output voltage and its measurement accuracy.
Procedure for calibrating current measurement accuracy.
Procedure for calibrating the external voltage reference input.
Introduction to application functions and programming output sequences in LIST mode.
Details on Pulse, Step, and Harmonic measurement modes for waveform generation/analysis.
Generating complex waveforms by combining harmonics or using sweeping frequencies.
Describes the AC source's internal structure and main functional blocks.
Details of power-on self-tests, error codes, and interpretation.
Common problems, their causes, and suggested corrective actions.
Overview of remote control via GPIB/RS-232C and interface connection details.
Guidelines for programming, syntax, data formats, and command conventions.
Navigating the command structure and understanding command execution order.
Detailed descriptions of common and instrument-specific SCPI commands.
To Next Page
