20
Table 8 – HL Series Connection Kit Overview
Catalog Number Description
Installation
Manual
HL-PC
Power Connection
Box for Hazardous
Locations
Division 1 certified junction box and seal
fitting. The kit is designed to connect self-
regulating cables to customer supplied
power wiring. The pipe stand-off and seal
fitting combination provides a water resis-
tant and explosion proof seal. The junction
box has a 3/4" opening with top or side
entry for the power connection.
PJ912
HL-S
Splice Kit for
Hazardous Locations
Division 1 certified junction box and seal
fittings. The kit is designed to splice two
self-regulating cables. The cable entry fit-
ting and seal fitting combination provides a
water-resistant and explosion proof seal.
PJ920
HL-T
Tee Kit for Hazardous
Locations
Division 1 certified junction box and seal
fittings. The kit is designed to splice three
self-regulating cables. The cable entry fit-
ting and seal fitting combination provides a
water-resistant and explosion proof seal.
PJ921
HL-ES
End Seal for
Hazardous Locations
Division 1 certified junction box and seal
fitting. The kit is designed to terminate a
run of self-regulating cable. The pipe
stand-off and seal fitting combination pro-
vides a water resistant and explosion proof
seal.
PJ918
To Next Page
Loading...
Need help?
General