25
Table 16 – Thermostats with Power Connection
Catalog Number Description
Installation
Manual
UBC
Line Sensing
Thermostat and
Power Connection
Kit
NEMA 4X rated junction box designed to connect a
single cable run to power and control cable output
via pipe temperature in non-hazardous areas. This
kit provides water-resistant cable entry with a 3/4”
opening to accept a conduit hub (CCH-2 or equal).
Temperature set point 0° to 400°F (-81°C to 200°C)
with 10°F scale divisions.
PJ942
RTBC
Line Sensing
Thermostat and
Power Connection
Kit
NEMA 4X rated junction box with line sensing ther-
mostat; 8” stainless steel capillary. Provides tem-
perature control and termination for one (1) cable.
PJ454
RTBC-EP
Line Sensing
Thermostat and
Power Connection
Kit
Modified version of the RTBC which utilizes a
hermetically sealed switch. Class I, Division 2
approved.
PJ973
To Next Page
Loading...
Need help?
General