EasyManua.ls Logo

Chrysler 200 2016 - To Cancel; To Turn off

Chrysler 200 2016
706 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: ACC cannot be set if there is a stationary vehicle
in front of your vehicle in close proximity.
Remove your foot from the accelerator pedal. If you do
not, the vehicle may continue to accelerate beyond the set
speed. If this occurs:
The message “DRIVER OVERRIDE” will display in
the EVIC/DID.
The system will not be controlling the distance be-
tween your vehicle and the vehicle ahead. The vehicle
speed will only be determined by the position of the
accelerator pedal.
To Cancel
The following conditions cancel the system:
The brake pedal is applied.
The CANCEL button is pushed.
An Anti-Lock Brake System (ABS) event occurs.
The shift lever/gear selector is removed from the
Drive position.
The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.
The vehicle parking brake is applied.
Driver seatbelt is unbuckled at low speeds.
Driver door is opened at low speeds.
To Turn Off
The system will turn off and clear the set speed in
memory if:
The Adaptive Cruise Control (ACC) ON/OFF button
is pushed.
The Normal (Fixed Speed) Electronic Speed Control
ON/OFF button is pushed.
The ignition is turned OFF.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Information Provided by:

Table of Contents

Other manuals for Chrysler 200 2016

Related product manuals