Adaptive Cruise Control (ACC) Operation
The speed control lever (located on the left side of the
steering column) operates the ACC system.
Activating Adaptive Cruise Control (ACC)
You can only activate ACC if the vehicle speed is between
25 mph and 100 mph (Canada 30 km/h and 180 km/h).
When the system is turned on and in the READY state,
the Electronic Vehicle Information Center (EVIC) dis-
plays “ACC READY.”
When the system is OFF, the EVIC displays “ACC OFF.”
NOTE:
You cannot enable ACC under the following
conditions:
•
When you apply the brakes.
•
When the parking brake is set.
•
When the automatic transmission is in P (Park), R
(Reverse), or N (Neutral).
•
When the Electronic Stability Program (ESP) is
switched off.
•
When pressing the RES/ACCEL switch without a
previously set speed in memory.
1 — RESUME/ACCEL
2 — SET/DECEL
3 — CANCEL
4 — DISTANCE SETTING
5 — ON/OFF
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123
3
To Next Page
Loading...
Need help?
General
