Chrysler 2010 Sebring User Manual

REMOTE AUDIO CONTROLS
• The switches are located on the rear
surface of the steering wheel.
Right Switch
• Press the switch up or down to increase
and decrease the volume.
• Press the button in the center to change
modes AM/FM/CD/SAT.
Left Switch
• Press the switch up or down to search for
the next listenable station or select the
next or previous CD track.
• Press the button in the center to select the
next preset station (Radio) or to change
CDs if equipped with a CD Changer.
ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)
• The EVIC features a driver interactive
display that is located in the instrument
cluster. The system allows the driver to
select information by pressing the buttons
on the instrument panel switch bank
located below the climate controls. For
additional information refer to
Programmable Features in this guide.
• Press and release the MENU
button
to advance the display to Trip Functions or
Personal settings or to return to the
default System status display.
• Press and release the STEP
button to advance the display through the
various Trip Functions or Personal settings.
• Press and release the COMPASS
button to display the compass heading and
the outside temperature.
• Press and release the RESET
button to accept a selection. The RESET
button also resets various Trip Functions.
29
ELECTRONICS

Chrysler 2010 Sebring Specifications

General

Brand	Chrysler
Model	2010 Sebring
Category	Automobile
Language	English