Component
Fluid, Lubricant, or Genuine
Part
Capacities
Spark Plugs (2.7L
Engine)
TE10PMC5 (Gap 0.050 in
[1.27 mm])
—
Spark Plugs (3.5L
Engine)
ZFR5LP-13G (Gap 0.050 in
[1.27 mm])
—
Automatic Transaxle MOPAR
®
ATF+4
®
Automatic
Transmission Fluid or
equivalent licensed ATF+4
®
product.
—
Brake Master Cylinder MOPAR
®
DOT 3 and SAE J1703
should be used or equivalent. If
DOT 3 is not available, then
DOT 4 is acceptable. Use only
recommended brake fluids.
—
Power Steering
Reservoir
This system requires the use of
MOPAR
®
Hydraulic System
Power Steering Fluid or
equivalent, (which meets
Chrysler Material Standard
MS–10838).
—
57
MAINTAINING YOUR VEHICLE
To Next Page
Loading...
