EasyManua.ls Logo

Chrysler 300 2011 - Enabling and Disabling Parksense

Chrysler 300 2011
536 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING ALERTS
Rear Distance
(in/cm)
Great than
79 in (200 cm)
79-39 in
(200-100 cm)
39-25 in
(100-65 cm)
25-12 in
(65-30 cm)
Less than 12 in
(30 cm)
Front Distance
(in/cm)
Greater than 4
47 in (120 cm)
47-39 in
(120-100 cm)
39-25 in
(65-30 cm)
25-12 in
(65-30 cm)
Less than 12 in
(30 cm)
Audible Alert
(Chime)
None
Single 1/2
second tone
Slow Fast Continuous
Display Message Park Assist ON
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Arc None
3 Solid
(Continuous)
3 Flashing 2 Slow Flashing 1 Slow Flashing
Enabling And Disabling ParkSense
ParkSense can be enabled and disabled using the
Uconnect Touch™ System. The available choices are: Off,
Sound Only, or Sound and Display. Refer to “Uconnect
Touch™ Settings” in “Understanding Your Instrument
Panel” for further information.
When the ParkSense soft-key is pressed to disable the
system, the EVIC will display the “PARK ASSIST OFF”
message for approximately five seconds. Refer to “Elec-
tronic Vehicle Information Center (EVIC)” in “Under-
standing Your Instrument Panel” for further information.
When the shift lever is moved to REVERSE or to DRIVE
(at or below 11 mph [18 km/h]) and the system is
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Table of Contents