EasyManua.ls Logo

Chrysler Cruiser PT 2010 - Towing Tips

Chrysler Cruiser PT 2010
398 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Towing Tips
Before setting out on a trip, practice turning, stopping
and backing the trailer in an area away from heavy
traffic.
Automatic Transaxle
The OVERDRIVE/DRIVE gear range can be selected
when towing. However, if frequent shifting occurs while
in this range, third gear should be selected.
NOTE: Using the third gear range while operating the
vehicle under heavy operating conditions will improve
performance and extend transaxle life by reducing exces-
sive shifting and heat build up. This action will also
provide better engine braking.
The automatic transaxle fluid and filter should be
changed if you REGULARLY tow a trailer for more than
45 minutes of continuous operation. Refer to “Mainte-
nance Schedule” for the proper maintenance intervals.
Seven-Pin Connector
1 Battery 5 Ground
2 Backup Lamps 6 Left Stop/Turn
3 Right Stop/Turn 7 Running Lamps
4 Electric Brakes
5
STARTING AND OPERATING 289

Table of Contents

Related product manuals