EasyManuals Logo

Chrysler Cruiser PT 2010 User Manual

Chrysler Cruiser PT 2010
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #292 background imageLoading...
Page #292 background image
HAZARD WARNING FLASHERS
The Hazard Warning flasher switch is located on the
instrument panel, below the radio.
Press the switch to turn on the Hazard Warning
flasher. When the switch is activated, all directional
turn signals will flash on and off to warn oncoming
traffic of an emergency. Press the switch a second time to
turn off the Hazard Warning flasher.
Do not use this emergency warning system when the
vehicle is in motion. Use it when your vehicle is disabled
and is creating a safety hazard for other motorists.
If it is necessary to leave the vehicle to go for service, the
Hazard Warning flasher will continue to operate with the
ignition key removed and the vehicle locked.
NOTE: With extended use, the Hazard Warning flasher
may wear down your battery.
IF YOUR ENGINE OVERHEATS
In any of the following situations, you can reduce the
potential for overheating by taking the appropriate ac-
tion.
On the highways Slow down.
In city traffic While stopped, put transaxle in
NEUTRAL, but do not increase engine idle speed.
292 WHAT TO DO IN EMERGENCIES

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chrysler Cruiser PT 2010 and is the answer not in the manual?

Chrysler Cruiser PT 2010 Specifications

General IconGeneral
BrandChrysler
ModelCruiser PT 2010
CategoryAutomobile
LanguageEnglish

Related product manuals