500-3650E rev1.3
Welcome Alarm Status Admin
Reference
37
Command Result
# #
Cancels any keys previously
entered.
Command
Result
#
If performing a “”
command with UID/PIN,
insert a "
#" key between
command and UID/PIN
entry (e.g. “
1 # 341
4141 ” for user 341,
pin=4141 trying to arm the
area:
1).
No Commands (Simple Access)
Door Mode <Login> Notes
Card Only <card> If a UID/PIN is entered, it will be
ignored
Card & PIN <card> <pin> UID is not required since the card
automatically identifies the <uid>
Card or UID/PIN <card> or <uid> <pin>
UID/PIN Only <uid> <pin> If card is presented, it will be ignored.
<uid> – User ID
With Commands
Door Mode <cmd> <Login> Notes
Card Only <cmd> <card> If a UID/PIN is entered, it will be
ignored
Card & PIN <cmd> <card> <pin> Card badging must always be done
before the PIN entry.
Card or UID/PIN <cmd> <card> or
<cmd> # <uid> <pin>
Pressing “#” is required between the
command and uid/pin entry.
UID/PIN Only
<cmd> # <uid> <pin>
Pressing “#” is
required between the
command and uid/pin entry. (Note
<cmd> # <pin> in PIN Only systems)
<cmd> – Command
To Next Page
Loading...
Need help?
General
