Do you have a question about the CIAT Climaciat and is the answer not in the manual?
Cooling Capacity | Not available |
---|---|
Heating Capacity | Not available |
Energy Efficiency Ratio (EER) | Not available |
Coefficient of Performance (COP) | Not available |
Noise Level | Not available |
Explains the purpose and scope of the air handling units.
Details the importance and content of the manual.
Covers terms and conditions for warranty.
Outlines critical safety checks before performing any work on the unit.
Emphasizes compliance with local regulations and manual instructions.
Lists relevant European directives and harmonised standards.
Specifies required qualifications for personnel working on the unit.
Details permissible pressure and temperature limits for operation.
Explains the information found on the unit's identification plate.
Illustrates common symbols used in the manual and on the unit.
Provides guidelines for safe and secure shipping of the units.
Details procedures for shipping units within containers.
Instructions for inspecting and handling unit delivery.
Explains safe lifting methods and precautions for the units.
Specifies points for securing units during handling and transport.
Provides guidelines for proper storage of units before installation.
General warnings before installation begins.
Guidance on selecting an appropriate installation site for the unit.
Instructions for assembling multiple unit blocks together.
Details options for unit support systems.
Instructions for installing roof or canopy accessories.
Explains the connection and installation of the condensate drain siphon.
Covers the connection of heating and cooling coils.
Guides on installing optional control valves.
Procedures for filling and draining hydraulic circuits.
Details on connecting the electric heater.
Specific connection instructions for electric heaters.
Explains the connection of the droplet eliminator.
Instructions for connecting the unit's fans.
Connecting multiple EC fan motor assemblies.
Electrical connection for AC motor fans.
Guidance on connecting and installing filters.
Covers connections for standalone steam humidifiers.
Details on connecting dampers and mixing components.
Electrical connection for servomotors.
Covers connections for heat recovery units.
Refers to manufacturer's manual for controlled units.
Precautions for units without manufacturer-supplied control.
Activation and maintenance of the siphon.
Essential checks before unit commissioning.
Commissioning steps related to filters.
Steps for fan commissioning and checks.
Commissioning procedures for EC and AC motors.
Checks for belt and pulley transmission systems.
Procedures for commissioning heating and cooling coils.
Pre-commissioning checks and start-up for electric heaters.
Pre-commissioning and commissioning of steam humidifiers.
Commissioning of dampers and mixing components.
Commissioning of heat recovery units.
Post start-up checks for water flow, noise, and leaks.
General guidelines and product recommendations for cleaning.
Maintenance procedures for filters, including replacement.
Maintenance for direct-drive and belt-drive fans.
Maintenance procedures for heating and cooling coils.
Maintenance and checks for electric heaters.
Maintenance for steam humidifiers and associated components.
Maintenance for dampers, servomotors, and drain pans.
Maintenance for sound attenuator components.
Maintenance for plate and rotary heat exchangers.
A comprehensive list of checks and maintenance tasks with frequencies.
Procedures for prolonged periods of unit downtime.
General safety and operational notes for ATEX zones.
Explains ATEX markings and conformity certificates.
ATEX specific filter requirements.
Safety rules for using tools in ATEX environments.
Periodic checks for vibration and ground continuity.
A template for recording ATEX-related checks and tests.
Procedure for safely shutting down the unit.
Guidelines for safely disassembling the unit.
Lists materials for recycling.
Lists fluids for recovery and recycling.
Procedures for WEEE disposal.