Need help?Do you have a question about the CIAT SPACE ZV Series and is the answer not in the manual?
General| Brand | CIAT |
|---|---|
| Model | SPACE ZV Series |
| Category | Air Conditioner |
| Language | English |
Check unit condition upon arrival to identify any damage or missing accessories.
Each unit has a data plate with an identification number for correspondence.
Details warranty periods and coverage for units installed in metropolitan France and abroad.
Guidelines for choosing the installation site, considering structural capacity, accessibility, and noise.
Recommendations for unit placement, ensuring proper air circulation and avoiding environmental issues.
Pre-handling checks for lifting devices, structural support, panel fixing, and clearances.
Instructions for safely lifting and placing the unit using designated lifting points.
Essential checks before duct connection, including air flow direction and sealing.
Procedure for connecting the hot water coil, including preliminary checks and hydraulic connections.
Step-by-step process for filling and purging the hydraulic circuit of the hot water coil.
Instructions for connecting electric heaters and the condensate drain system.
Guidelines for electrical power supply, cable routing, and wiring connections according to regulations.
Sequential steps for assembling the fresh air hood components.
Description of the extraction module's operation and its control mechanism.
Safety functions of high and low pressure pressostats, including their connection and operation.
Details on optional pressostats for monitoring filter status and air flow.
Information on the main electrical isolator and optional smoke detection system.
Procedure to check and adjust pulley alignment within the fan compartment.
Instructions for adjusting belt tension and replacing the fan motor.
Procedures for checking motor/fan bearing play and dismounting the fan pulley.
Guidelines for filter cleaning, replacement, and media regeneration.
Method for cleaning air, water, and refrigerant coils using compressed air.
Steps for ensuring correct operation, including crankcase heater activation and compressor stop timers.
Technical checks for the air handling fan, including current measurement and forced running.
Adjustment settings for manual reset high pressure pressostats for compressor safety.
Adjustment settings for automatic low pressure pressostats for compressor safety.
Settings for electric battery safety, anti-frost, and filter clogging pressostats.
Settings for smoke detectors and fire thermostats related to safety and air return.
Procedure for setting the air flow pressostat to prevent airflow trip.
Diagram showing access panels for fans, electrical, compressor, and filters on base/post installations.
Diagram showing access panels for fans, electrical, compressor, and filters for specific models.
Diagram showing access panels for fans, electrical, compressor, and filters for specific models.
Diagram showing access panels for fans, electrical, compressor, and filters for specific models.
Diagram showing access panels for fans, electrical, compressor, and filters for specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
Diagram showing access panels and dimensions for ground/frame installations of specific models.
To Next Page
