Case 2: Blinking Wi-Fi Icon - Device in broadcast (AP) mode. If you have not registered the
device yet, please complete registration process as per step 3A/3B of this manual. If you have
registered the device, refer to scenario 3 at the end of this page.
Case 3: Wi-Fi Icon with small triangle - Device connected with router but has no internet access.
Please ensure you have a working internet connection and restart the device.
Changing Wi-Fi network of Cielo Device
Scenario 1:
Cielo Device & mobile are on same Wi-Fi network - Tap on wrench symbol to enter device
settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi'. List of available networks will appear.
Enter password of selected network. New settings are done.
Scenario 2:
Cielo Device & mobile are on different Wi-Fi network - Go to your mobile settings and connect
your mobile with same Wi-Fi network as Cielo Device. The remaining process is same as given
in scenario 1.
Scenario 3:
Cielo Device is in broadcast (AP) mode - Connect mobile with Cielo Device Wi-Fi i.e.
Cielo_xxxx_xxxxxx in mobile Wi-Fi settings. Go back to ‘Cielo Home’ App. Tap on wrench
symbol to enter device settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi' button. List of
available Wi-Fi networks will appear. Select your Wi-Fi & enter its password. Your new Wi-Fi
settings are done.
Instruction for Breez Plus wired connections (24V OR 12V)
Step 1:
Switch off power by using the master switch or mains circuit breaker. This is very important for
your safety.
To Next Page
Loading...
