Cielo BREEZ PLUS - User Manual

Step 1A: Mounting & placement
Cielo Breez Plus can be wall mounted using the wall mounting kit or placed on a table using
table stand (both included in the box). Before finalizing the placement, it is recommended to first
power up, register & test the device to find optimal location from where signals can easily reach
the AC. To ensure this place your Breez Plus in ACs line of sight & power it up.
For optimal placement and control:
• Place Breez Plus within 13 feet (4 meters) and in the line of sight of your air conditioner. If
signal is not reaching the AC, please place it at another suitable location within the room.
• To avoid deviated sensor readings, do not place Breez Plus where it may be exposed to
excessive sunlight or other heat sources.
Step 1B: Powering up options
• Breez Plus can be powered up using a 5V adapter (always use the provided power adapter and
USB cable for optimal results).
OR
• Through wired connection options of 24V or 12V (from your existing thermostat wiring). For
details on wired connections, please refer to Wired Connection
Please DO NOT use any other voltage level to power up Breez Plus.
Please choose ONLY ONE power up option i,e, either 5V OR 24/12V.
Special Note: It is strongly advised that whenever there is a need to use remote control for
AC/Heat Pump, point it towards Breez Plus while performing any action. This way, your
AC/Heat Pump and Cielo Home App will always be in sync.
Step 1C: Prior to app installation
Your Smart Phone
• Make sure that your smart phone’s Wi-Fi is turned ON.
• Make sure that your smart phone has internet access.
Your Wi-Fi Router
• Make sure that you have working internet connection on your Wi-Fi router
• Make sure that there is no proxy server or authentication server configured on your internet
connection.
• Make sure that there is no captive portal on your Wi-Fi router.

Summary

Step 1 A: Mounting & placement

For optimal placement and control

Guidelines for optimal placement and control of the device.

Step 1 B: Powering up options

Step 1 C: Prior to app installation

Step 2 A: App Installation

Step 2 B: Login;Register

Step 3 A: Registration - iOS users

Step 3 B: Registration - Android users

Breez Plus - Local control options

Adjusting the temperature of your AC:

Guide on how to adjust the AC temperature locally.

Troubleshooting tips

Case 1: Stable Wi-Fi Icon

Case 2: Blinking Wi-Fi Icon

Case 3: Wi-Fi Icon with small triangle

Instruction for Breez Plus wired connections (24 V OR 12 V)

Step 1:

Safety instruction to switch off power before wired connections.

Step 2:

Locating the power source and ensuring AC line of sight.

Step 3:

Connecting wires and mounting the back plate.

Step 4 A: Setting up schedules for your heating and cooling - iOS users

Step 4 B: Setting up Comfy Temperature Mode - iOS users

Step 4 C: Setting up Comfy Humidity Mode - iOS users

Step 4 D: Setting up Temperature Range Control - iOS users

Step 4 E: Enabling Location Control - iOS users

Step 4 F: Checking your ACs Air Filter Status - iOS users

Step 4 H: Calibrate Room Temperature - iOS users

Step 4 J: Change Appliance - iOS users

Step 5 A: Setting up schedules - Android users

1. Setting up a schedule

Guide on setting up heating/cooling schedules for the AC.

Step 5 B: Setting up Comfy Temperature Mode - Android users

Step 5 C: Setting up Comfy Humidity Mode - Android users

Step 5 D: Setting up Temperature Range Control - Android users

Step 5 E: Enabling Location Control - Android users

Step 5 F: Checking your ACs Air Filter Status - Android users

Step 5 H: Calibrate Room Temperature - Android users

Step 5 J: Change Appliance - Android users

Cielo BREEZ PLUS Specifications

General

Voice Assistants	Amazon Alexa, Google Assistant, Siri Shortcuts
Sensors	Temperature, Humidity
Operating Temperature	32°F to 122°F (0°C to 50°C)
Compatibility	mini-split, window, and portable ACs
Connectivity	Wi-Fi (2.4 GHz)
Control	Remote control, Mobile app (iOS & Android)
Features	Scheduling, Geofencing
Weight	3.2 ounces