Need help?Do you have a question about the CIM MAXIMA Series and is the answer not in the manual?
Describes the sequential steps the machine follows to produce a card.
Details electrical and technical specifications of the machine.
Classifies the equipment and lists relevant standards and certifications.
Specifies the environmental conditions for machine operation.
Provides the physical dimensions and weight of the machine.
Details the machine's production capabilities and card handling capacity.
Describes the data coding specifications for magnetic stripes and card encoding.
Outlines essential safety rules and precautions for operating the machine.
Explains the meaning of symbols used on the machine and in the manual.
Instructions to verify all accessories are present and undamaged before installation.
Details how to connect the machine to power and the computer.
Explains how to connect the machine to a computer using a serial cable.
Provides warnings and advice to follow during the installation process.
Describes the procedure for powering on the machine and checking the display.
Describes the machine's console, including the LCD display and control keys.
Explains the functions of the keyboard keys for operation and diagnostics.
Explains how to view production statistics and counters on the display.
Details the process of accessing and modifying machine configuration parameters.
Guides the user through initiating the machine's programming and setup process.
Explains how to configure the machine's serial port settings.
Details how to select and configure communication protocols for the machine.
Defines the infiller device and its function in the machine.
Details the lubrication procedure for the trolley and clamp components.
General| Card Capacity | 100 cards (hopper) |
|---|---|
| Communication Interface | USB |
| Operating System | Windows |
| Card Material | PVC, PET |
| Card Thickness | 0.18mm to 1.0mm |
| Power Supply | 100-240V, 50/60Hz |
To Next Page
