Need help?Do you have a question about the CIM ME1500S and is the answer not in the manual?
Explains manual's purpose and safety symbols for danger, warnings, and caution.
Details specific safety symbols found on the machine and their meanings.
Provides manufacturer contact details, support, and spare parts information.
Overview of the ME1500S as an automatic embossing/stamping machine.
Lists electrical, physical, and environmental specifications of the machine.
Explains the sequential steps of the metal tag production process.
General safety rules for machine installation and operation.
Identifies specific hazards and risk zones within the machine.
Overview of safety mechanisms like guards and micro switches.
Instructions for safely unpacking the machine from its crate.
Lists and instructs to verify all included accessories are intact.
Guidelines for placing the machine correctly for operation and ventilation.
Instructions for connecting the machine to the power supply.
Overview of machine operation, software, and control panel.
Adapting internal units for tag dimensions before starting production.
Steps to start the machine and initiate the self-test.
Main screen for tag editing, preview, and job management.
Accesses machine configuration parameters.
Accesses machine diagnostics, tests, and updates.
Specific weekly cleaning and maintenance tasks for the operator.
Instructions for lubricating the X-axis clamp carriage.
Instructions for lubricating the Y-axis clamp carriage.
Specifies lubrication points for the cams.
How to access the machine remotely using FTP.
Explains remote operation capabilities via LAN or Wi-Fi.
How to access machine functions via a web browser.
Explains error display and provides a table for troubleshooting.
Procedures and recommendations for machine disassembly and disposal.
Guidance on separating and properly disposing of machine components.
General| Print Technology | Embossing |
|---|---|
| Card Feeding | Automatic |
| Connectivity | USB, Ethernet |
| Type | Desktop embosser |
| Interfaces | USB, Ethernet |
| Card Thickness | 0.5 mm to 1.0 mm |
| Card Material | PVC, ABS |
| Embossing Speed | Up to 150 cards per hour |
| Power Supply | 110-230V, 50-60Hz |
To Next Page
