cinetto PS10 User Manual

60 kg
± 1,5 mm
18<53
4 mm
PS10
PS19
compatible
Istruzioni di montaggio
IT
ES
Italiano
Español
EN
E
nglish
F
R
Français
DE
Deutsch
Via Meucci, 4
35030 Rubano (PD) - Italy
Tel. +39 049 8977211
Fax +39 049 635822
e-mail: info@cinetto.it
www.cinetto.it
Assembly instructions
Instructions de montage
Montageanleitungen
Instrucciones de ensamblaje
4 mm

cinetto PS10 Specifications

General

Brand	cinetto
Model	PS10
Category	Door Opening System
Language	English

Summary

PS10 Sliding Door System Overview

Key Features and Specifications

Highlights PS10 system capacity, dimensions, soft-close, and compatibility.

PS10 Sliding Door Installation Guide

Step 1: Install SOFTSPACE Activators in Rails

Insert SOFTSPACE activators or locks into the sliding rails.

Step 2: Attach Cabinet Rails

Fix the sliding rails to the wardrobe according to the chosen mounting method.

Step 3: Mount Slides to Door Panel

Secure the sliding mechanisms (pattini) to the door panel.

Step 4: Install Optional Handle Spacer

Insert the optional spacer for the handle in the upper internal slide.

Step 5: Hang and Secure Doors

Mount doors, engage slides into rails, and activate anti-derailing system.

Step 6: Adjust Door Height and Alignment

Close doors, adjust height, and address issues with doors adjusted too high.

Step 7: Verify and Lock Upper/Lower Stops

Check and secure the position of upper and lower stops/locks.

Step 8: Adjust Soft-Close Force

Adjust the clamping force of upper locks for systems without SOFTSPACE.

Step 9: Apply Dust Cover and Straightening System

Install dust cover and optional straightening system.

Step 10: Adjust Door Tension and Avoid Lubricants

Adjust door tension and heed warnings against using specific lubricants on components.