Need help?Do you have a question about the CipherLab 1166 and is the answer not in the manual?
General| Wavelength | 630 nm |
|---|---|
| Read rate (max) | 100 reads/s |
| Pitch reading angle | -70 - 70 ° |
| Bluetooth | Yes |
| Standard interfaces | USB, Keyboard wedge, RS-232 |
| Input voltage | 3.7 V |
| Battery capacity | 700 mAh |
| Power consumption | 170 mA |
| Operating time | 936 min |
| Maximum operating distance | 100 m |
| Certification | CE, C-Tick, FCC, IC, TELEC |
| Product color | Gray |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 200 g |
|---|
Compliance information for devices used in the USA, detailing FCC rules.
Compliance information for devices used in Canada, referencing interference standards.
Safety warnings and guidelines for operating products with laser components.
Instructions for cleaning, storing, and maintaining the barcode scanner.
Overview of CipherLab BT Barcode Scanners and their key features.
List of barcode symbologies supported by the scanner and their default status.
Procedure to access the scanner's configuration mode using setup barcodes.
Steps and methods for reading setup barcodes to configure scanner settings.
How to retrieve and view the current configuration settings of the scanner.
Information on battery operation, charging, power-saving, and auto-shutdown features.
Details on transmit buffer and memory mode operation for data storage.
Explanation of LED status lights and beeper feedback for scanner operations.
Details on different scanning modes, scanning timeouts, and re-read delays.
Steps to configure the Bluetooth HID interface, including keyboard settings.
Connecting the scanner via 3666 using the keyboard wedge interface.
Configuring the RS-232 serial interface for data transmission.
Procedure for establishing a wireless connection using the 3666 base.
Steps to set up a WPAN connection using a Bluetooth dongle.
Configuration options for Codabar, Industrial 25, Interleaved 25, and Matrix 25.
Settings for EAN-8, EAN-13, UPC-A, UPC-E, and related addon codes.
Configuration for GS1 DataBar, MSI, Plessey, Telepen, and Pharmacode symbologies.
Setting up rules for replacing characters in scanned data.
Configuring and managing Code IDs for different barcode symbologies.
Steps to define data criteria, fields, and transmission sequences for editing.
Practical examples demonstrating how to configure data editing formats.
Technical specifications for the 1166 and 1266 barcode scanners.
Instructions for upgrading scanner firmware via 3666 base or Bluetooth dongle.
List and explanation of serial commands for scanner configuration and control.
Reference table for keyboard wedge key types, statuses, and mappings.
Configuring PIN code for scanner authentication and disabling the feature.
To Next Page
