Need help?Do you have a question about the CipherLab 1105 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Wavelength | 630 nm |
| Sensor type | Laser |
| Read rate (max) | 100 reads/s |
| Pitch reading angle | -70 - 70 ° |
| Optical sensor resolution | 3648 pixels |
| Linear (1D) barcodes supported | Codabar, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), MSI, Pharmacode, Plessey, Telepen, U.P.C. |
| 2D (matrix & stacked) barcodes supported | - |
| Connectivity technology | Wired |
| Product color | Gray |
| Housing material | Polyurethane |
| Power consumption (standby) | 0.06 W |
| Power consumption (typical) | 0.190 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 145 mm |
|---|---|
| Width | 93 mm |
| Height | 64 mm |
| Weight | 165 g |
Setup and configuration for connecting the scanner via Keyboard Wedge interface.
Details on configuring the scanner for serial communication via RS-232.
Settings for various GS1 DataBar (RSS) barcode symbologies.
How to configure character substitution rules for scanned data.
Setting prefix and suffix codes to be added to scanned data.
Configuring specific Code IDs for different barcode symbologies.
Options for enabling or disabling length codes for barcode data.
How to enable configured data editing formats for use.
Step-by-step guide to setting up custom data editing formats.
Setting conditions for data to be processed by editing formats.
To Next Page
