Do you have a question about the CipherLab 1564 and is the answer not in the manual?
Type | Handheld bar code reader |
---|---|
Wavelength | 625 nm |
Sensor type | CCD |
Read rate (max) | 60 reads/s |
Tilt reading angle | -60 - 60 ° |
Optical sensor resolution | 752 pixels |
Linear (1D) barcodes supported | Codabar, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), MSI, U.P.C. |
2D (matrix & stacked) barcodes supported | Aztec Code, Composite Codes, Data Matrix, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39 |
Wireless range | 90 m |
Bluetooth version | 2.0+EDR |
Operating frequency | 2400 MHz |
Standard interfaces | Bluetooth |
Connectivity technology | Wired & Wireless |
Certification | BSMI, CE, C-tick, FCC, IC, NCC, KC, SRMC, TEL |
Product color | Black |
Housing material | Thermoplastic urethane (TPU) |
Protection features | Shock resistant |
International Protection (IP) code | IP30 |
Battery life | 16 h |
Input voltage | 5 V |
Battery voltage | 3.7 V |
Battery capacity | 800 mAh |
Power consumption | 230 mA |
Power source type | Battery, DC |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 10 - 90 % |
Depth | 153 mm |
---|---|
Width | 61 mm |
Height | 93 mm |
Weight | 185 g |
Procedure to enter the scanner's configuration mode using setup barcodes.
How to save settings and exit configuration mode or abort changes.
Configuration settings for Bluetooth Human Interface Device (HID) interface.
Settings for connecting the scanner via 3656 using keyboard wedge emulation.
Configuration parameters for connecting the scanner via RS-232 using the 3656 stand.
Procedure to connect the scanner to the 3656 stand.
Steps to establish a WPAN connection using a Bluetooth dongle.
Step-by-step guide to upgrade the 1564 scanner firmware.
Instructions for upgrading the firmware of the 3656 stand.
List of serial commands for controlling the 1564 scanner.