CipherLab 9700A User Manual

125
Customize Project Configuration
Note:
For IPv4 settings, you can choose for the device to obtain an IP address via DHCP. Your
device IP addresses may be automatically assigned if DHCP is enabled on the adapter.
ADVANCED
Unfold “Wi-Fi Settings” and click “Advanced” option, the advanced Wi-Fi settings page is
shown to deliver the following functions:
WLAN PREFERENCES
Item
Description
Network Notification
Notify when an open network is available.
Keep Wi-Fi on during sleep
Set when to turn Wi-Fi on during sleep.
CIPHERLAB PROPRIETARY SETTINGS
Item
Description
Wi-Fi Frequency Band
Select Automatic, 5 GHz only, or 2.4 GHz only for your Wi-Fi
frequency band. The default setting is Automatic.
Roaming Enable
Select whether to enable Wi-Fi roaming or not.
Roaming trigger
The signal strength when triggering Wi-Fi roaming. The higher value
means the sensitivity of triggering roaming is higher.
Roaming delta
The qualification for roam candidates. The higher value means the
signal strength of candidate APs should be higher than the current
connected AP.
Background scan interval
The frequency of background scan when the device does not
connect the internet. The shorter time means the scanning
frequency is higher.
Set Country Code
Select the country code for your device.

CipherLab 9700A Specifications

General

Brand	CipherLab
Model	9700A
Category	PDA
Language	English