127
Customize Project Configuration
“Channel Selection” is to select the Wi-Fi channel(s) to narrow down frequency band of the
2.4GHz (802.11b/g/n) or 5 GHz (802.11a/n).
Select All
Select all the listed channels.
Clear All
Deselect all the channels you choose.
Delete WLAN connected list
Automatically clear all the saved WLAN profile on the device after
deploying ADC project settings. The newly-created WLAN profile set
by this ADC project will be added to the device later.
To Next Page
Loading...
Need help?
General
