CipherLab RK25 Owner Reference Guide

31
Quick Start
2) For the spare battery, please make sure the battery latch is at “Unlock” position, and
then insert the battery from its top side (where the contact pins are located) into the
spare battery compartment of the cradle with their contact pins connected. Press down
the bottom side of the battery (where the battery latch is located), and slide the battery
latch leftward to “Lock” position to fasten it.
To remove, please slide the battery latch to “Unlock” position, and directly take the
battery out.
3) Connect the adapter to the Cradle, and plug the other end into an electrical outlet.
The status of the mobile computer charging is shown on the device itself, while the LED
indicator on RK25 Charging & Communication Cradle shows the status of battery charging
as below:
Note:
(1) Not Charging could be the result of battery damage, battery’s failure to touch the
connector, or AC plug coming off.
(2) Charging error could be due to high battery temperature.
Cradle LED Indicator Status Description
Charging Red, solid Charging the battery
Red, blink Charging error
Red, flash once No battery
Green, solid Charging complete
No light Not charging
LEDIndicatoroncradle:

Indicates the charging status of
spare battery
LEDIndicatoronRK25
MobileComputer:
Indicates the charging status of
main battery

CipherLab RK25 Specifications

General

Brand	CipherLab
Model	RK25
Category	PDA
Language	English