REGULARLY VERIFY
1. The correct attachments of the mechanical parts and of the support screws of the pump.
2. The correct position, attachment and condition of the supply cables and of the insulating
parts.
3. The temperature of the motor. In the event of any excessive high, stop immediately and
have it repaired.
4. The vibration of the pump. In the case of any excessive high, stop immediately and have it
repaired.
CAUTION
Owing to the complexity of the cases covered, the instructions for installation, use and
maintenance contained in this manual do not attempt to examine all possible and imaginable
cases of se
rvice and maintenance. If supplementary instructions are required or special
problems arise, do not hesitate to contact the distributor/agent.
TECHNICAL DATA
Item CSPPD704 CSPPD705
Input Power 816w 1072w
H. Max 34ft 42ft
Q. Max/min 283L 316L
V 115 115
HZ 60 60
IP IPX5 IPX5
7
To Next Page
Loading...
