CHAPTER 2
Prepare for Installation
The images in this chapter are only for representational purposes, unless specified otherwise. The chassis'
actual appearance and size may vary.
Note
Statement 1071—Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
• Safety Guidelines, on page 3
• Compliance and Safety Information, on page 4
• Laser Safety, on page 6
• Energy Hazard, on page 6
• Preventing Electrostatic Discharge Damage, on page 6
• Cautions and Regulatory Compliance Statements for NEBS, on page 7
• Installation Guidelines, on page 8
• Procure Tools and Equipment, on page 8
• Prepare Your Location , on page 10
• Prepare Yourself , on page 11
• Prepare Rack for Chassis Installation, on page 12
• Clearance Requirements, on page 14
Safety Guidelines
Before you perform any procedure in this document, review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment. The following guidelines are for your safety and to protect the
equipment. Because the guidelines do not include all hazards, be constantly alert.
Hardware Installation Guide for Cisco 8200 Series Routers
3
To Next Page
Loading...
Need help?
General