CircuPool EDGE40 - Troubleshooting Guide Manual

CircuPool Help Guides: EDGE Series
1
WARNING – Always make sure the input power is completely disconnected before attempting any troubleshooting procedures.
All troubleshooting should be done by a qualified professional.
EDGE Series
Troubleshooting Guide
Table of contents:
Water Chemistry:
Requirements & Adding Salt pg.2
Langelier Saturation Index pg.3
How to Clean the Electrolytic Cell pg.4
Control Module Reprogramming pg.5
Low Chlorine Level in Pool pg.6
Troubleshooting Warning Lights:
Water Flow pg.9
Low Salt pg.10
Check Cell (Solid) pg.10
Check Cell (Flashing) pg.11
No Power on Display pg.11
How to Diagnose System Error Codes pg.12
Troubleshooting Error Codes:
System Error 1 pg.13
System Error 2 pg.15
System Error 3 pg.17
System Error 4-7 pg.18
Quick Reference pg.19
The complete EDGE manual is always available at Circupool.com:
https://www.circupool.com/Help-Guides-User-Guides_ep_41.html
WARNING
-
ALWAYS MAKE SURE THE INPUT POWER IS COMPLETELY DISCONNECTED BEFORE ATTEMPTING ANY
TROUBLESHOOTING PROCEDURES. ALL TROUBLESHOOTING SHOULD BE DONE BY A QUALIFIED PROFESSIONAL.
IMPORTANT
- REMEMBER THAT YOUR POOL IS COMPATIBLE WITH CHLORINE AND SHOCK AS NORMAL. IF YOUR POOL IS
EXPERIENCING TEMPORARY LOSS OF CHLORINE OR OTHER DIFFICULTIES, ADD SANITIZER AS NEEDED TO MAINTAIN THE POOL.