CircuPool RJ-Classic Series Troubleshooting Guide

CircuPool Help Guides: RJ Classic Series
1
RJ Classic Series
Trouble Shooting Guide
Table of contents:
Basic Water Chemistry pg.2
Phosphates & Nitrates pg.4
Langelier Saturation Index pg.5
Low Chlorine Level in Pool pg.6
No Power to Control Unit pg.9
Water Fault or Add Salt LED Indicators pg.12
How to Clean the Electrolytic Cell pg.18
How to Disassemble the Cell pg.19
How to Inspect the Seals on the Cell pg.22
How to Install the LCD Display Circuit Board pg.23
How to Install the Keypad pg.24
The complete RJ Classic manual is always available at Circupool.com:
http://www.circupool.com/how-to-install-a-salt-chlorine-generator.php
IMPORTANT - REMEMBER THAT YOUR POOL IS COMPATIBLE WITH CHLORINE AND SHOCK AS NORMAL. IF YOUR POOL IS
EXPERIENCING TEMPORARY LOSS OF CHLORINE OR OTHER DIFFICULTIES, ADD SANITIZER AS NEEDED TO MAINTAIN THE POOL.
WARNING - ALWAYS MAKE SURE THE INPUT POWER IS COMPLETELY DISCONNECTED BEFORE ATTEMPTING ANY
TROUBLESHOOTING PROCEDURES. ALL TROUBLESHOOTING SHOULD BE DONE BY A QUALIFIED PROFESSIONAL.

CircuPool RJ-Classic Series Specifications

General

Brand	CircuPool
Model	RJ-Classic Series
Category	Lighting Equipment
Language	English