Need help?Do you have a question about the CircuPool RJ Series and is the answer not in the manual?
Important safety instructions, including warnings about injury, children, heavy usage, water flow, electrical codes, isolation valves, and chemical use.
Mount the Control Module close to the pump and filtration system, at least 3 feet above ground level.
The Electrolytic Cell is fitted into the return line after the pump, filter, and heater if applicable.
Power must be shut off before wiring. Follow local and NEC/CEC electrical codes, ensure proper grounding and bonding.
Instructions on using evaporated, granulated, non-iodized salt (Sodium Chloride) for the system.
Details the recommended salinity range (3000-4000 ppm) and how to achieve it.
General| Model | RJ Series |
|---|---|
| Type | Saltwater Chlorine Generator |
| Voltage | 120/240 VAC |
| Installation | In-line installation |
| Compatibility | Compatible with most pool types |
To Next Page
