INTRODUCTION 1
GETTING STARTED 1
SAFETY INSTRUCTIONS 2
INSTALLATION
Overview 3
Installing the Control Module 4
Installing the Electrolytic Cell 4
Wiring 5
Installation Checklist 5
OPERATION
The Chemistry Involved 7
Adding Salt 7
Salt Levels 8
Using the Control Panel 10
MAINTENANCE
Ideal Chemistry Levels 13
Maintaining the Electrolytic Cell 14
HELPFUL HINTS 16
TROUBLESHOOTING 18
WARRANTY 20
RJ Series User Guide
Congratulations on your recent purchase of a CircuPool RJ Series
Saltwater Chlorine Generator. CircuPool’s high performance systems
offer escape from the routine of manual pool chlorination and
sanitization. Please take a moment to read through the entire manual
before installing your new unit. Your generator must be installed and
operated as specified.
READ FIRST
As with any electrical device, it is very important that the installation
and service of this equipment be performed by a qualified person
with the skills and experience required to do it safely and correctly.
Improper installation or service can result in severe electrical shock to
the installer or user of the equipment or pool. Please choose your
installer with great care!
To Next Page
Loading...
