----- AMk-AM2k -400 V- ELECTRONIC METERS -------- M-981 189 --- Page Nº 14
6.- MAINTENANCE
The AM-ITF & AM2-ITF ENERGY METERS do not require any special
maintenance. No adjustment, maintenance or repairing action should be done over
the instrument open and powered and, should those actions are essential, high-
qualified operators must perform them.
Before any adjustment, replacement, maintenance or repairing operation is carried
out, the instrument must be disconnected from any power supply source.
When any protection failure is suspected to exist, the instrument must be
immediately put out of service. The instrument’s design allows a quick replacement
in case of any failure.
7.- TECHNICAL SERVICE
For any inquiry about the instrument performance or whether any failure happens,
contact to CIRCUTOR’s technical service.
CIRCUTOR S.A. - Aftersales Service
c / Lepanto, 49
08223 - TERRASSA - SPAIN
Tel - 34 - 93 745 29 00
fax - 34- 93 745 29 14
e-mail : central@circutor.es
To Previous Page
Loading...
