Need help?Do you have a question about the Circutor CIRWATT Series and is the answer not in the manual?
General| Brand | Circutor |
|---|---|
| Model | CIRWATT Series |
| Category | Measuring Instruments |
| Language | English |
Details available CIRWATT meter configuration options for various installations.
Describes the meter's safety seals and their purpose in preventing tampering.
Explains the STAND BY and READING modes of the meter's display.
Describes the different screen types: Stand by, Menu, and Data screens.
Provides access to contract values and manufacturer information.
Allows access to current and historical closure data for Contract 1.
Displays absolute and incremental energy values for Contract 1.
Displays current values for Contract 2.
Shows data for Contract 2, Closure 01.
Displays current and closure values for Contract 3.
Used to check equipment's working and indicators.
Shows contracted powers for calculating power excesses.
Displays information on transformation ratios.
Shows current power, max demand, and totals.
Displays instant electrical magnitudes.
Shows parameters for communication ports.
Displays equipment identifiers and protocol information.
Shows information on output impulse values.
Displays dates of time changes.
Identifies the specific model of the CIRWATT meter.
Provides the equipment's serial number and date of manufacture.
Allows a quick check to verify proper equipment installation.
Shows the current status of the equipment's operation.
Indicates the language setting configured for the equipment.
Shows the current display contrast percentage.
Specifies power supply, nominal voltage, and consumption details.
Outlines current measurement methods and accuracy ratings.
Describes memory type, setting, and file sizes for data storage.
Details the storage capacity for events, tariffs, and load curve data.
Details battery type, life, and temporary operation capability.
Describes digital outputs and LED output specifications.
Lists safety category and adherence to relevant standards.
Specifies the protocol used for on-site optical reader access.
Lists relevant EN standards for meter performance and EMC.
Covers design standards and mounting points for installation.
Explains the terminal layout for indirect meter connections.
Details the terminal configuration for direct measurement.
Provides visual guides for various three-phase system connections.
Outlines the primary maintenance task: battery replacement.
Provides essential contact details for technical assistance.
Illustrates wiring for RS-232/RS-485 communication with PCs and modems.
Step-by-step guide for changing the internal battery.
Explains the meaning of power signs and energy quadrants.
Describes the protocol and setup for Ethernet network communication.
To Next Page
