Circutor CIRWATT Series - General Information Screens (L4); Operational Indicators (L40); Contracted Power Information (L41); Transformation Ratio Data (L42)

Page no. 10
The codes for the incremental value codes are shown below:
Table 7 Incremental energy value codes for the meter.
Inc (Incremental)
OBIS Without OBIS
kWh 1.19.1 INCIMP T1 C1-ACT
kWh 1.19.2 INCIMP T2 C1-ACT
kWh 1.19.3 INCIMP T3 C1-ACT
kWh 1.19.4 INCIMP T4 C1-ACT
kWh 1.19.5 INCIMP T5 C1-ACT
kWh 1.19.6 INCIMP T6 C1-ACT
kWh 1.19.0 INCIMP TOTAL
C1-ACT
Consumption per Active Energy
tariff period from the last bill
closure (if active) included in the
total
1.19.x where x = tariff (period)
kvarh 1.59.1 INCQ1 T1 C1-ACT
kvarh 1.59.2 INCQ1 T2 C1-ACT
kvarh 1.59.3 INCQ1 T3 C1-ACT
kvarh 1.59.4 INCQ1 T4 C1-ACT
kvarh 1.59.5 INCQ1 T5 C1-ACT
kvarh 1.59.6 INCQ1 T6 C1-ACT
kvarh 1.59.0 INCQ1 TOTAL
C1-CO1
Consumption per Q1 Reactive
Energy from the last bill closure
(if active), included in the total
1.59.x where x = tariff (period)
Power Excesses 1.12.1 EXCES T1 C1-ACT
Power Excesses 1.12.2 EXCES T2 C1-ACT
Power Excesses 1.12.3 EXCES T3 C1-ACT
Power Excesses 1.12.4 EXCES T4 C1-ACT
Power Excesses 1.12.5 EXCES T5 C1-ACT
Power Excesses 1.12.6 EXCES T6 C1-ACT
Excesses from the last bill
closure (if active)
1.12.x where x = tariff (period)
Maximum 1.16.1 MAXDEM T1 C1-ACT
Maximums 1.16.2 MAXDEM T2 C1-ACT
Maximums 1.16.3 MAXDEM T3 C1-ACT
Maximums 1.16.4 MAXDEM T4 C1-ACT
Maximums 1.16.5 MAXDEM T4 C1-ACT
Maximums 1.16.6 MAXDEM T6 C1-ACT
L11
Maximums 1.16.0 MAXDEM TOTAL
C1-ACT
Maximums from bill closure (if
active), included in the total
1.16.x where x = tariff (period)