Page no. 5
4.2.- Types of screen.
There are three types of screen.
4.2.1.- Stand by screen
The STAND BY screen shows information without the need of using the equipment’s
key. It will be typically used for showing the customer the necessary information to
control the measurement in the easiest way possible. (This is the default screen)
09-09-2003 12:23:10
Q1 1+2+3+ T534 NBC
4.2.2.- Menu Screen
The MENU screen shows the different options to access the data screens or the other
secondary menu screens. It is only used in READING mode.
INFO
INFO FAB
4.2.3.- Data Screen.
The DATA screens show information on a specific group of data. It is only used in
READING mode.
The data lines consist of two fields: one is the code and the other the value of the data.
9 characters are reserved for the code field and the remainder for the value field until
the 20 display characters have been used.
1.18.1.01 000000003
1.18.2.01 000000009
The codes are defined in the following way.
Table 1 Display Codes
Display code B . CD
B
0 Total
1 Contract 1
2 Contract 2
3 Contract 3
Energy purchase Energy sale
CD
18 Total active energy (kWh)
19 Incremental active energy (kWh)l
58 Total Reactive Energy (kvarh)
59 Incremetal reactive energy (kvarh)
16 Maximum demand (kW)
12 Power Excesses
28 Active energy total (kWh)
29 Incremental active energy (kWh)
68 Total Reactive Energy (kvarh)
69 Incremental Reactive Energy
(kvarh)
26 Maximum demand (kW)
22 Power Excesses
To Next Page
Loading...
Need help?
General
