Circutor CIRWATT Series - Manufacturer and Installation Data; Equipment Model Identification; Series Number and Manufacture Date; Installation Verification Screen

Page no. 12
The variable codes for incremental values are shown below:
Table 9 Incremental energy value codes for closure 1 of contract 1
Inc (Incremental)
OBIS SIN OBIS
kWh 1.19.1.01 INCIMP T1 C1-C01
kWh 1.19.2.01 INCIMP T2 C1- C01
kWh 1.19.3.01 INCIMP T3 C1- C01
kWh 1.19.4.01 INCIMP T4 C1- C01
kWh 1.19.5.01 INCIMP T5 C1- C01
kWh 1.19.6.01 INCIMP T6 C1- C01
Consumption per Active
Energy tariff periods from
the last billing period (if
active), included in the
total (period 0)
1.19.x.01 where x = tariff
(period)
kWh 1.19.0.01 INCIMP TOTAL C1- C01 1.19.x.01 donde x =
tarifa (período)
kvarh 1.59.1.01 INCQ1 T1 C1- C01
kvarh 1.59.2.01 INCQ1 T2 C1- C01
kvarh 1.59.3.01 INCQ1 T3 C1- C01
kvarh 1.59.4.01 INCQ1 T4 C1- C01
kvarh 1.59.5.01 INCQ1 T5 C1- C01
kvarh 1.59.6.01 INCQ1 T6 C1- C01
kvarh 1.59.0.01 INCQ1 TOTAL
C1- C01
Consumption per Q1
Reactive Energy tariff
periods from the last billing
period (if active), included
in the total (period 1)
1.59.x.01 where x = tariff
(period)
Power Excesses 1.12.1.01 EXCES T1 C1- C01
Power Excesses 1.12.2.01 EXCES T2 C1- C01
Power Excesses 1.12.3.01 EXCES T3 C1- C01
Power Excesses 1.12.4.01 EXCES T4 C1- C01
Power Excesses 1.12.5.01 EXCES T5 C1- C01
Power Excesses 1.12.6.01 EXCES T6 C1- C01
Excesses from the last
billing period (if active)
1.12.x.01 where x = tariff
(period)
Maximums 1.16.1.01 MAXDEM T1 C1- C01
Maximums 1.16.2.01 MAXDEM T2 C1- C01
Maximums 1.16.3.01 MAXDEM T3 C1- C01
Maximums 1.16.4.01 MAXDEM T4 C1- C01
Maximums 1.16.5.01 MAXDEM T4 C1- C01
Maximums 1.16.6.01 MAXDEM T6 C1- C01
L12
Maximums 1.16.0.01 MAXDEM TOTALC1-C01
Maximums form last billing
period (if active) included
in the total (period 0)
1.16.x.01 where x = tariff
(period)
4.4.2.3.- Screen L13 (CONTRACT 1: CLOSURE 02)
This shows information on values from contract 1 closure 02. The screen acts the
same as for L12.
The information is displayed in exactly the same way as in screen L12, but field F will
have the value 02 instead of 01.
• For example: 1.18.1.02  Absolute active energy consumed, from period 1,
penultimate bill closure.
4.4.2.4.- Screen L14 (CONTRACT 1: CLOSURE 03)
Shows information on values recorded for contract 1 closure 03. The screen acts in the
same way as L12.
The information is displayed in exactly the same way as in screen L12, but field F will
have the value 03 instead of 01.
• For example: 1.18.1.03  Absolute active energy consumed, from period 1, bill
closure 3.