EasyManua.ls Logo

CIRRUS DESIGN SR22 - Flap Limitations; Other Limitations

CIRRUS DESIGN SR22
506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-20 Information Manual
Section 2 Cirrus Design
Limitations SR22
Oxygen System
Whenever the operating rules require the use of supplemental oxygen,
the pilot must:
Use an oxygen system approved by Cirrus Design and listed in
the Oxygen System AFM Supplement Part Number 13772-109.
Secure the oxygen bottle in the right front seat as described in
the AFM Supplement noted above.
Inflatable Restraint System
Serials 0002 thru 1499, 1501 thru 1519 after SB 2X-25-14 and serials
1500, 1520 and subsequent; Use of a child safety seat with the
inflatable restraint system is prohibited.
Flap Limitations
Serials 0002 through 0227 before accomplishment of Service Bulletin
SB 22-27-02: Simultaneous Flap operation and COM transmission is
prohibited.
Approved Takeoff Settings...........................................UP (0%) or 50%
Approved Landing Settings ............................. Up (0%), 50%, or 100%
Paint
To ensure that the temperature of the composite structure does not
exceed 150° F (66° C), the outer surface of the airplane must be
painted in accordance with the paint colors and schemes as specified
in the Airplane Maintenance Manual. Refer to Airplane Maintenance
Manual (AMM), Chapter 51, for specific paint requirements.
Other Limitations
Smoking
Smoking is prohibited in this airplane.
March 2010

Table of Contents